Master Cylinder Saver (Braktec Trials)

We all know it. You tip over, the bike takes a hit, and the master cylinder clamp cracks, you are done for the day and you are buying a whole new master cylinder.

We built the solution. The Master Cylinder Saver wraps the broken clamp and holds it back together with a proper billet clamp, giving you a working brake or clutch again at a fraction of the cost of a new perch. Fit it after the break, or fit it before, because the support tabs are designed to take the impact so the master cylinder does not.

For those who want to take preventative measures, put this on and the tabs support the master cylinder, preventing breakage. Or keep one in your bag as insurance in case your bike takes a spill.

• Repairs a broken Braktec master cylinder clamp without replacing the whole perch
• Much cheaper than a new master cylinder
• Fits both the brake and the clutch master cylinder, one part covers both
• Works on broken and unbroken master cylinders, so it also works as prevention
• Support tabs brace the master cylinder and take the crash load, so it stops breaking in the first place
• Improved Braking power by stiffening master cylinder brake mount, reducing flex translating to better feel and braking power. 
• Stronger than the stock clamp and adds impact protection
• Small and light, ideal to carry in your bag on long rides
• Sold individually
• 2 year crash warranty

A broken clutch or brake miles from the van usually means a long hike out. The Saver is small enough to live in your pack or fender bag, and it goes on with basic hand tools, so a broken clamp becomes a five minute repair instead of the end of the ride.

Carry one for the group. It costs less than the walk.

Fits Braktec trials master cylinders, brake and clutch, broken or not broken.

Installation takes a few minutes with basic hand tools. Follow the full step by step video installation guide.

The Saver clamps around the master cylinder in place of, or over, the damaged stock clamp and torques down to the bar. Do not over tighten the clamp bolts, 4 to 6 Nm is plenty.

Like everything we build, the Master Cylinder Saver is covered by our 2 year crash warranty. Designed and tested in Squamish, British Columbia, by riders.